TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 217 of 1555
11-11. DOOR SEAL AND PULL STRAP REPLACEMENT This task covers: a. Door Seal Removal c. Door Pull Strap Removal b. Door Seal Installation d. Door Pull Strap Installation INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Seal (Appendix G, Item 400) Two lockwashers (Appendix G, Item 200) RTV sealant (Appendix C, Item 74) Manual References TM 9-2320-387-24P Maintenance Level Unit TM 9-2320-387-24-2 11-22 Change 1 Remove door seal (2) from door (1) and clean adhesive from door (1). Install door seal (2) on door (1) with sealant. Remove two screws (5), lockwashers (6), washers (4), and door pull strap (3) from door (1). Discard lockwashers (6). Install door pull strap (3) on door (1) with two washers (4), lockwashers (6), and screws (5). Tighten screws (5) to 21 lb-in. (2 N•m). d. Door Pull Strap Installation c. Door Pull Strap Removal b. Door Seal Installation a. Door Seal Removal