Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 192 of 1555

10-95. DIVERTER MANIFOLD AND HOUSING REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove four screws (16) and panel assembly (15) from right mounting bracket (3) and A-beam (1). 2. Remove four rivets (14) from manifold and housing (9) and duct (13). 3. Remove two screws (8) from manifold and housing (9) and heater (7). 4. Remove screw (6) from clip (5) and manifold and housing (9). 5. Remove pushnut (11) and disconnect defroster cable core (12) from baffle pin (10). Discard pushnut (11). 6. Pull manifold and housing (9) away from A-beam (1) and loosen two clamps (4) securing defroster flex ducts (2) to manifold and housing (9). 7. Remove manifold and housing (9) from heater (7). INITIAL SETUP: Applicable Models M1113 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Pushnut (Appendix G, Item 313) Four rivets (Appendix G, Item 347.3) Manual References TM 9-2320-387-24P TM 9-2320-387-24-2 Change 1 10-159 1 4 9 14 11 16 12 13 15 10 2 3 5 8 7 6 4 ~