TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 19 of 1555
10-2. FUEL FILLER HOUSING MAINTENANCE (Cont’d) Refer to para. 10-56 for plusnut (11) inspection and replacement. 1. Pull filler cap (2) through filler housing (5) on right outer wheelhouse panel (8). 2. Install filler housing (5) on right outer wheelhouse panel (8) with six washers (9) and screws (10). Tighten screws (10) to 20 lb-in. (2 N•m). NOTE M1114 vehicles are equipped with plusnuts instead of nuts and washers. Apply sealing compound on threads for M1114 vehicles only. 3. Install filler housing (5) on filler spout (6) with three washers (4), capscrews (3), washers (4), and nuts (7). For M1114 only, tighten capscrews (3) to 75 lb-in. (9 N•m). 4. Install filler cap (2) on filler spout (6) with T-handle (1). c. Installation b. Inspection TM 9-2320-387-24-2 10-4 Change 1 FOLLOW-ON TASK: Close fuel door (M1114 only) (TM 9-2320-387-10). M1114 4 3 5 2 1 6 4 7 9 10 11 ~ 8