TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 153 of 1555

10-69. DRIVER’S REARVIEW MIRROR BRACKET MAINTENANCE This task covers: a. Removal b. Installation a.1. Inspection Remove capscrew (3), washer (4), capscrew (6), washer (5), and bracket (2) from A-pillar armor (1) and firewall armor (7). For plusnut inspection and replacement, refer to para. 10-56. Apply sealing compound to threads of capscrews (3) and (6), and install bracket (2) on firewall armor (7) and A-pillar armor (1) with washer (4), capscrew (3), washer (5), and capscrew (6). Tighten capscrew (3) to 21 lb-ft (29 Nm) and capscrew (6) to 68-75 lb-in. (8-9 Nm). b. Installation a.1. Inspection a. Removal INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-24P Equipment Condition Rearview mirror removed (para. 10-68). Maintenance Level Unit TM 9-2320-387-24-2 10-120 Change 1 FOLLOW-ON TASK: Install rearview mirror (para. 10-68). 7 2 3 4 5 ~ 1 6