TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 151 of 1555
10-68. REARVIEW MIRROR MAINTENANCE (Cont'd) d. Assembly c. Disassembly 1. Remove two capscrews (10), lockwashers (9), washers (8), spacers (6), and mirror assembly (5) from mirror brackets (7). Discard lockwashers (9). 2. Remove locknut (21), washer (22), nylon washers (23) and (2), capscrew (4), and upper mounting bracket (1) from mirror arm assembly (3). Discard locknut (21). 3. Remove locknut (20), washer (19), and lower mounting bracket (18) from mirror lock (17). Discard locknut (20). 4. Remove locknut (15), washer (16), and mirror lock (17) from arm assembly (3). Discard locknut (15). NOTE To remove clamps, slide clamps off mirror arm assembly. 5. Remove two locknuts (11), washers (12), capscrews (14), clamps (13), and brackets (7) from mirror arm assembly (3). Discard locknuts (11). TM 9-2320-387-24-2 10-118 Change 1 e. Installation NOTE Perform step 1 for M1113 models only. Perform step 2 for M1114 models only. 1. Install mirror assembly (5) on windshield frame (24) and body (28) with two washers (27), lock- washers (26), and capscrews (25). 2. Install mirror assembly (5) on windshield frame (24) and rearview mirror bracket (31) with two capscrews (25) and locknuts (29). Tighten capscrews (25) to 10 lb-ft (14 N•m). NOTE • To install clamps, slide clamps on mirror arm assembly. • Ensure clamps are positioned on mirror arm assembly to align with center of mirror head. 1. Install two clamps (13) and mirror brackets (7) on mirror arm assembly (3). Install mirror brackets (7) between clamps (13) with two capscrews (14), washers (12), and locknuts (11). 2. Install mirror lock (17) on mirror arm assembly (3) with washer (16) and locknut (15). 3. Install lower mounting bracket (18) on mirror lock (17) with washer (19) and locknut (20). 4. Install upper mounting bracket (1) on mirror arm assembly (3) with capscrew (4), nylon washers (2) and (23), washer (22), and locknut (21). NOTE Spacers must be positioned between mirror head and mirror brackets for proper installation. 5. Install mirror assembly (5) and two spacers (6) on mirror brackets (7) with washers (8), lock- washers (9), and capscrews (10).