TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 149 of 1555
10-68. REARVIEW MIRROR MAINTENANCE NOTE Perform step 1 for M1113 models only. Perform step 2 for M1114 models only. 1. Remove two capscrews (3), lockwashers (4), washers (5), and mirror assembly (2) from windshield frame (7) and body (6). Discard lockwashers (4). 2. Remove two locknuts (9), capscrews (3), and mirror assembly (2) from windshield frame (7) and rearview mirror brackets (8). Discard locknuts (9). NOTE For inspection and removal of insertnut, refer to para. 10-56. Inspect insertnut (1). Replace if damaged. b. Inspection This task covers: a. Removal d. Assembly b. Inspection e. Installation c. Disassembly INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Four lockwashers (Appendix G, Item 206) Seven locknuts (Appendix G, Item 156) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Maintenance Level Unit NOTE Replacement procedures for left and right rearview mirrors are basically the same. This procedure covers the left rearview mirror. a. Removal TM 9-2320-387-24-2 10-116 Change 1