TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1463 of 1555
D-84.2 Change 1 TM 9-2320-387-24-2 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont‘d) Figure D-103. Hex Wrench. INSTRUCTIONS: 1. Cut one piece of metal strap to size as shown. 2. Remove all burrs and sharp edges. 0.120 in. (3.048 mm) R 2 PL 1.250 in. (31.750 mm) 0.188 in. (4.775 mm) 10.000 in. (254.000 mm) 0.500 in. (12.700 mm) R 2 PL 2.375 in. (60.325 mm) HEX 0.310 in. (7.874 mm) R 6 PL 3.000 in. (76.200 mm) Ø MATERIAL BLOCK STOCK SIZE DESCRIPTION SPECIFICATION 0.188-in. (4.775 mm) THICK STRIP, METAL ASTM A569 SHEET CUT TO SIZE MANUFACTURED PART NUMBER (INCHES) FROM NSN N/A AS SHOWN 9515-00-814-7316