TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1339 of 1555
34-3. SUSPENSION ALIGNMENT INSTRUCTIONS INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Alignment equipment, vehicle (Appendix B, Item 113.1) Materials/Parts Two locknuts (Appendix G, Item 174) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Tires inflated to proper pressure (TM 9-2320-387-10). Maintenance Level General support This task covers: a. Caster and Camber Check c. Toe Check and Adjustment b. Caster and Camber Adjustment NOTE • The alignment check will be made on a level surface, with front tires in the straight-ahead position. Vehicles will be checked at curb weight only. • Ensure M1113 models have S250 shelter installed before performing caster and camber checks. • Ensure M1114 models are at curb weight when performing caster and camber checks. 1. Check caster and compare to the specifications in table 34-1. 2. Check camber and compare to the specifications in table 34-1. 3. If either caster or camber does not meet specifications, go to task b, caster and camber adjustment. a. Caster and Camber Check TM 9-2320-387-24-2 Change 1 34-1 CHAPTER 34 SUSPENSION (GS) MAINTENANCE 34-2. SUSPENSION MAINTENANCE TASK SUMMARY TASK PAGE PARA. PROCEDURES NO. 34-3. Suspension Alignment Instructions 34-1 34-1. INTRODUCTION This chapter contains maintenance instructions for suspension system components at the general support maintenance level. Some subassemblies and parts must be removed before suspension system components can be accessed. They are referenced to other paragraphs of this manual.