TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1328 of 1555
33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 Change 1 33-99 1. Position metal strip C (6) with arrow facing up and toward right on insert panel (1). Align reference lines (8) and insert panel edges (7). 2. Using metal strip C (6) as a template, locate, mark, and drill nine 0.187-in. (4.75-mm) diameter holes through insert panel (1). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert panel (1) and metal strip C (6). 4. Position metal strip C (6) on insert panel (1) and install with nine rivets (9). 5. Remove any adhesive residue and clean edges of metal strip C (6) and insert panel (1). g. Metal Strip C and Insert Panel Assembly DRILL NINE 0.187-IN. (4.75-MM) DIAMETER HOLES