TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1327 of 1555
33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 33-98 Change 1 1. Position reinforcement strip B (2) on reinforcement strip A (3). Align between reference line (4) and side edge of reinforcement strip B (2). 2. Using reinforcement strip B (2) as a template, locate, mark, and drill eighteen 0.187-in. (4.75-mm) diameter holes in reinforcement strip A (3) and insert panel (1). Remove reinforcement strip B (2). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surfaces of rein- forcement strip A (3) and reinforcement strip B (2). 4. Position reinforcement strip B (2) on reinforcement strip A (3) and install with eighteen rivets (5). 5. Remove any adhesive residue and clean edges of reinforcement B (2), reinforcement strip A (3), and insert panel (1). f. Reinforcement Strip B and Insert Panel Assembly DRILL EIGHTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES