TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1326 of 1555
33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 Change 1 33-97 1. Position reinforcement strip A (3) on insert panel (1). Align reference lines (2) with edge of reinforcement strip A (3). 2. Using reinforcement strip A (3) as a template, locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes through insert panel (1). Remove reinforcement strip A (3). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert panel (1) and reinforcement strip A (3). 4. Position reinforcement strip A (3) on insert panel (1) and install with fourteen rivets (4). 5. Remove any adhesive residue and clean edges of reinforcement strip A (3) and insert panel (1). e. Reinforcement Strip A and Insert Panel Assembly DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES