TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 1322 of 1555

33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 Change 1 33-93 6. Cut metal strip (5) from sheet metal, and mark center line (6) and directional arrow (10). Identify metal strip (5) as E. 7. Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip E (5). 8. Cut two metal strips (7) from sheet metal, and mark center line (8), and directional arrow (9). Identify metal strips (7) as F and G. 9. Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip F (7). 10. Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip G (7). METRIC CONVERSION 0.60 IN. 15.24 MM 1.20 IN. 30.48 MM 1.25 IN. 31.75 MM 1.40 IN. 35.56 MM 1.45 IN. 36.83 MM METRIC CONVERSION 2.00 IN. 50.80 MM 2.50 IN. 63.50 MM 2.90 IN. 76.20 MM 3.00 IN. 35.56 MM 14.20 IN. 360.68 MM DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES