TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1303 of 1555
33-13. RIGHT FRONT FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 33-74 Change 1 1. Position metal strip A (2), with arrow facing up and toward left, on insert panel (1). Align reference line (3) with edge of metal strip A (2) and reference lines (5) with edge of insert panel (1). 2. Using metal strip A (2) as a template, locate, mark, and drill ten 0.187-in. (4.75-mm) diameter holes through insert panel (1). Remove metal strip A (2). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert panel (1) and metal strip A (2). 4. Position metal strip A (2) on insert panel (1) and install with ten rivets (4). 5. Remove any adhesive residue and clean edges of metal strip A (2) and insert panel (1). d. Metal Strip A and Insert Panel Assembly DRILL TEN 0.187-IN. (4.75-MM) DIAMETER HOLES