TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1295 of 1555
33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 33-66 Change 1 4. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to metal strip G (1). 5. Apply adhesive sealant to shaded area of left rear floor panel (8) and insert panel (7). 6. Position metal strip G (1) on left rear floor panel (8) and insert panel (7) and install three rivets (9). 7. Using metal strip G (1) as a template, locate and drill eleven 0.187-in. (4.75-mm) diameter holes through left rear floor panel (8) and insert panel (7). 8. Secure metal strip G (1) on left rear floor panel (8) and insert panel (7) with eleven rivets (5). 9. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to metal strip H (2). 10. Apply adhesive sealant to area shaded on left rear floor panel (8) and insert panel (7). 11. Position metal strip H (2) on left rear floor panel (8) and insert panel (7) and install three rivets (6). 12. Using metal strip H (2) as a template, locate, mark, and drill eleven 0.187-in. (4.75-mm) diameter holes through left rear floor panel (8) and insert panel (7). 13. Secure metal strip H (2) on left rear floor panel (8) and insert panel (7) with four rivets (4) and seven rivets (3). 14. Spot-paint insert panel (7) and left rear floor panel (8) (TM 43-0139).