TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1289 of 1555
33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 33-60 Change 1 1. Position metal strip F (1), with arrow facing up and toward metal strip C (3), on insert panel (2). Align reference lines (3). 2. Using metal strip F (1) as a template, locate, mark, and drill ten 0.187-in. (4.75-mm) diameter holes in insert panel (2). Remove metal strip F (1). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert panel (2) and metal strip F (1). 4. Position metal strip F (1) on insert panel (2) and install with ten rivets (4). 5. Remove any adhesive residue and clean edges on metal strip F (1) and insert panel (2). j. Metal Strip F and Insert Panel Assembly DRILL TEN 0.187-IN. (4.75-MM) DIAMETER HOLES