TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1287 of 1555
33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 33-58 Change 1 1. Position metal strip E (2), with arrow facing up and toward metal strip C (4), on insert panel (1). Align reference lines (3). 2. Using metal strip E (2) as a template, locate, mark, and drill seven 0.187-in. (4.75-mm) diameter holes through insert panel (1). Remove metal strip E (2). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert panel (1) and metal strip E (2). 4. Position metal strip E (2) on insert panel (1) and install with seven rivets (5). 5. Remove any adhesive residue and clean edges on metal strip E (2) and insert panel (1). i. Metal Strip E and Insert Panel Assembly DRILL SEVEN 0.187-IN. (4.75-MM) DIAMETER HOLES