TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1281 of 1555
33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 33-52 Change 1 1. Position reinforcement strip B (1) on insert panel (2), and align reference lines (3) with edges of reinforcement strip B (1). 2. Using reinforcement strip B (1) as a template, locate, mark, and drill eighteen 0.187-in. (4.75-mm) diameter holes through reinforcement strip A (4) and insert panel (2). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of reinforcement strip A (4) and reinforcement strip B (1). 4. Position reinforcement strip B (1) on reinforcement strip A (4) and install with eighteen rivets (5). 5. Remove any adhesive residue and clean edges of reinforcement strip B (1), reinforcement strip A (4), and insert panel (2). f. Reinforcement Strip B and Insert Panel Assembly DRILL EIGHTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES