TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1279 of 1555
33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 33-50 Change 1 1. Position reinforcement strip A (2) on insert panel (1). Align reference lines (3) with edges of rein- forcement strip A (2). 2. Using reinforcement strip A (2) as a template, locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes through insert panel (1). Remove reinforcement strip A (2). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surfaces of insert panel (1) and reinforcement strip A (2). 4. Position reinforcement strip A (2) on insert panel (1) and install with fourteen rivets (4). 5. Remove any adhesive residue and clean edges on reinforcement strip A (2) and insert panel (1). e. Reinforcement Strip A and Insert Panel Assembly DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES