TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1271 of 1555
33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-387-24-2 33-42 Change 1 1. Cut reinforcement strip (1) from sheet metal, and mark four reference lines (2), centerline (3), and letter A on reinforcement strip (1). 2. Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes and one 0.750-in. (19.05-mm) diameter hole through reinforcement strip A (1). 3. Remove all burrs and round all sharp edges on reinforcement strip A (1). b. Reinforcement Strips Fabrication METRIC CONVERSION 0.125 IN. 3.175 MM 0.75 IN. 19.05 MM 1.50 IN. 38.10 MM 2.00 IN. 50.80 MM 3.00 IN. 76.20 MM 4.00 IN. 101.60 MM 8.00 IN. 203.20 MM 14.00 IN. 355.60 MM DRILL 0.750-IN. (19.050-MM) DIAMETER HOLE DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES