TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1259 of 1555
TM 9-2320-387-24-2 33-30 Change 1 33-11. LEFT FRONT FLOOR PANEL REPAIR (Cont’d) 1. Position metal strip D (2), with arrow facing up and toward metal strip A (4), on insert panel (1). Align reference lines (3). 2. Using metal strip D (2) as a template, locate, mark, and drill seven 0.187-in. (4.75-mm) diameter holes through insert panel (1). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded mating surface of insert panel (1) and metal strip D (2). 4. Position metal strip D (2) on insert panel (1) and install with seven rivets (5). 5. Remove any adhesive residue and clean edges of metal strip D (2) and insert panel (1). 1. Position metal strip B (6), with arrow facing up and toward metal strip C (8), on insert panel (1). Align reference line (7) with edge of metal strip B (6). 2. Using metal strip B (6) as a template, locate, mark, and drill twelve 0.187-in. (4.75-mm) diameter holes through insert panel (1). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert panel (1) and metal strip B (6). g. Metal Strip B and Insert Panel Assembly f. Metal Strip D and Insert Panel Assembly DRILL SEVEN 0.187-IN (4.75 MM) DIAMETER HOLES