TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1255 of 1555
TM 9-2320-387-24-2 33-26 Change 1 33-11. LEFT FRONT FLOOR PANEL REPAIR (Cont’d) 7. Position insert panel (2), with arrow facing down and toward front of vehicle, to underside of left front floor panel (1). 8. Obtain a minimum clearance of 0.10-in. (2.54-mm) between edges of insert panel (2) and left front floor panel (1). 9. Remove insert panel (2). 1. Position metal strip A (3), with arrow facing up and left, on insert panel (2). Align reference lines (5) and (4) with edges of metal strip A (3). 2. Using metal strip A (3) as a template, locate, mark, and drill thirteen 0.187-in.(4.75-mm) diameter holes through insert panel (2). 3. Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert panel (2) and metal strip A (3). 4. Install metal strip A (3) on insert panel (2) with thirteen rivets (6). 5. Remove adhesive residue and clean edges of metal strip A (3) and insert panel (2). d. Metal Strip A and Insert Panel Assembly