TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1248 of 1555
TM 9-2320-387-24-2 Change 1 33-19 33-11. LEFT FRONT FLOOR PANEL REPAIR This task covers: a. Left Front Insert Panel Fabrication f. Metal Strip D and Insert Panel Assembly b. Metal Strips Fabrication g. Metal Strip B and Insert Panel Assembly c. Left Front Floor Panel Removal h. Left Front Floor Panel and Insert Panel Drilling d. Metal Strip A and Insert Panel Assembly i. Insert Panel and Left Front Floor Panel Installation e. Metal Strip C and Insert Panel Assembly NOTE All dimensions are in inches. For metric conversion, see chart. 1. Cut insert panel (1) from sheet metal as shown and mark four reference lines (2) and directional arrow (3) on insert panel (1). a. Left Front Insert Panel Fabrication METRIC CONVERSION 1.25 IN. 31.75 MM 16.50 IN. 419.10 MM 33.00 IN. 838.20 MM INITIAL SETUP: Applicable Models M1113 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Riveter tool kit (Appendix B, Item 123) Shop equipment, automotive maintenance and repair: field maintenance, wheeled vehicles, Post, Camp and Station, set A (Appendix B, Item 10) Manual References TM 9-2320-387-24P TM 43-0139 Materials/Parts Eighty-eight rivets (Appendix G, Item 335) Twenty rivets (Appendix G, Item 347.2) Sheet metal (Appendix G, Item 439.1) Adhesive (Appendix C, Item 2.1) Adhesive sealant (Appendix C, Item 7.1) Equipment Condition • Fire extinguisher mount bracket removed (para. 10-53). • Driver’s seat assembly removed (para. 10-40). • Left floor insulation removed (para 10-31). Maintenance Level General Support