TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1245 of 1555
TM 9-2320-387-24-2 33-9. FIBERGLASS REPAIR a. General. The hood and engine access cover are made of fiberglass (sheet molding compound). Cracks, splits, or holes may be repaired with a glass-reinforced plastic laminate repair kit, ML-R-19907C, NSN 2090-00-372-6064. b. Inspection. NOTE Hood surface has a thin layer of gel coat that may appear cracked in a spider-web-like pattern due to hood flexing. No repair is required. 1. Examine cracks to determine if they are on the surface only, or are deep breaks into material thickness. 2. If filler material chips off at bonding flanges, appearing as cracked but not broken through, area need not be repaired. 3. If a total penetration crack greater than one inch exists in critical areas: such as hinges (31, latches (21, or hood stop (1) areas, repair immediately. 4. inches. If total penetration cracks exist in non-critical areas, do not repair until size is greater than three 5. If severe breaks develop in one area, remove fragmented material and use repair procedure for holes. 33-16