TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1211 of 1555
TM9-2320-387-24-2 -- 3 l-3. STEERING GEAR REPAIR (Cont’d) -1 13. 14. 15. 16. 17. NOTE Soak Teflon rings in warm water to ease assembly. Starting on inner seal ring groove, install O-ring seal (21 and a backup Teflon ring (11 on valve body (11). Repeat step 13 in order from innermost seal ring groove and install two remaining O-rings (21 and Teflon rings (1) on valve body (11). NOTE Rotate valve spool to install in valve. Install O-ring (9) on valve (8) and install valve (8) into valve body (111until flush with notched end of valve body (11). Install stub shaft (6) in valve 03) so pin (3) on stub shaft (6) engages hole (7) in valve (8). Align notch (5) in stub shaft cap (41 with pin (10) in valve body (111 and press stub shaft (6) and valve (8) into valve body (111. 31-14