TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 121 of 1555
TM 9-2320-387-24-2 10-58.2. UNDERBODY PROTECTION KIT REPLACEMENT (Cont’d) 10-98.6 Change 1 1. Remove six locknuts (6), washers (2), capscrews (3), washers (2), two transmission support brackets (4), and four rubber washers (5) from intermediate shield (1) and transmission mount crossmember (7). Discard locknuts (6) and rubber washers (5). 2. Remove locknut (8), washer (9), capscrew (10), and washer (9) from right support bracket (15) and right side frame rail (16). Discard locknut (8). 3. Remove locknut (22), washer (19), capscrew (18), and washer (19) from left support bracket (24), engine mount bracket (17), and left side frame rail (23). Discard locknut (22). 4. Remove four locknuts (14), washers (12), capscrews (11), washers (12), and right side support bracket (15) from right side mounting bracket (13). Discard locknuts (14). 5. Remove four locknuts (26), washers (21), capscrews (20), washers (21), and left side support bracket (24) from left side mounting bracket (25). Discard locknuts (26). 6. Remove two locknuts (29), washers (30), capscrews (31), washers (30), and intermediate shield (1) from front crossmember (27) and front shield (28). Discard locknuts (29). c. Intermediate Shield Removal