TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1209 of 1555
I TM9-2320-387-24-2 31-3. STEERING GEAR REPAIR (Cont’d) 1. 2. 3. 4. 5. 6. 7. NOTE For general assembly instructions, refer to para. 2-17. Using pitman shaft bearing remover/installer and adapter ring, install single-lip seal (4) and washer (2) in housing (3) only far enough to provide clearance for next seal (5) and washer (21. Using pitman shaft bearing remover/installer and adapter ring, install double-lip seal (51 and washer (2) in housing (3) only far enough to provide clearance for retaining ring (1). Install retaining ring (1) in housing (3). NOTE Soak Teflon ring in warm water to ease assembly. Install O-ring seal (7) and Teflon ring (6) on rack piston (81. Install worm shaft (9) in rack piston (81. Align lower ball return guide hole (10) with worm shaft groove. Alternately install eight black and eight chrome bearing balls (11) into lower guide hole (10) while rotating worm shaft (9) counterclockwise. PITMAN SHAFT BEARING REMOVER/INSTALLER 31-12