TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1175 of 1555
I TM 9-2320-387-24-2 1 30-3. DIFFERENTIAL REPAIR (Cont’d) I 7. Mark two bearing caps (1) and housing (3) for assembly and remove four capscrews (2) and two bearing caps (1) from housing (3). 8. Install differential housing spreader into holes in axle holding ftiure adapters and install dial indicator to read from each end of housing (3). Dial indicator must have preload setting of 0.020 in. (0.5 mm). CAUTION Over tightening of differential housing spreader will damage differential housing. 9. Spread housing (3) 0.010 in. (0.25 mm) and remove dial indicator. :2 DIFFERENTIAL HOUSING SPREADER Y DIAL INDICATOR -1 AXLE HOLDING ~_.- ..--- FIXTURE ADAPTER 30-4