TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 115 of 1555
TM 9-2320-387-24-2 1 O-58. Ml 3 DECONTAMINATION BRACKETS INSTALLATION This task covers: Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance Level Unit Manual References TM 9-2320-387-24P NOTE The following procedure is for initial installation of apparatus (PM E5-51-527). This apparatus is not included in TM 9-2320-387-24P. Perform steps 1 through 4 for Ml113 vehicle only Perform steps 5 through 7 for Ml114 vehicle only. 1 Installation 1 1. Using plate (3) as template, locate, mark, and drill twenty-four 0.187-in. diameter holes (1) in rear of shelter (2). 2. Install plate (3) on shelter (2) with twenty-five rivets (4). 3. Install four rivnuts (7) in holes (8) of plate (3). 4. Install bracket (6) on plate (3) with four capscrews (5). Tighten capscrews (5) to 49 lb-ft. (66 N-m). 5. Using bracket (9) as a template, locate, mark, and drill four 0.333 diameter holes (13) in cargo floor (14). 6. Install four rivnuts (12) in holes (13). 7. Install bracket (9) on cargo floor (14) with four lockwashers (11) and screws (10). ,. 1 O-98