TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 1135 of 1555

TM9-2320-387-24-2 28-19. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (Cont’d) I 1 k. Front Servo Installation Install spring (2) and seated on spring (2). piston assembly (1) in transmission case (3), ensuring piston assembly ( 11) is firmly 1. Band Apply Pin Check 1. Place gauge pin in rear servo bore of transmission case (3) and rotate to side A. 2. Place checking tool on servo bore with hex nut (5) facing parking paw1 side of transmission case (3). 3. Secure checking tool to transmission case (3) with two servo cover screws (4). Tighten screws (4) to 18 lb-R ( 24 Nom). 4. Ensure gauge pin can move freely in checking tool. 5. Apply 25 lb-R (34 Nom) of torque to hex-nut (5). 6. Read edge of gauge pin that is even with checking tool edge at pin gauge. Record number and letter. 28-84