TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1131 of 1555
TM 9-2320-387-24-2 28-19. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (Cont’d) h. Fourth Clutch, Turbine Shaft, and Overdrive Carrier Assembly Installation 1. Remove snapring (l), backing plate (2), four clutch plate assemblies (51, and clutch plates (3) from fourth clutch housing (4). 2. Install fourth clutch housing (4) on transmission case (61, aligning bolt hole in housing (4) with bolt hole in case (6). 3. Install bolt (7) on fourth clutch housing (4). Tighten bolt (7) to 13-17 lb-ft (18-23 Nom). 28-80