TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1124 of 1555
Change 1 28-73 28-19. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (Cont’d) TM 9-2320-387-24-2 4. Position actuator (5) in detent lever (7) over pawl (1) in transmission case (11). 5. Install shaft seal (10) in transmission case (11). 6. Coat manual shaft (9) with transmission fluid and install shaft (9) on transmission case (11) through seal (10) and detent lever (7). 7. Secure manual shaft (9) to detent lever (7) with nut (6). 8. Adjust position of manual shaft (9) in transmission case (11) and secure manual shaft (9) with retaining pin (8). Tighten nut (6) to 18 lb-ft (24 N • m). 9. Install slide bracket (3) over actuator (5) and transmission case (11) with two capscrews (4). 8 3 4 5 6 7 9 10 11 1 2 14 13 11 2 1 15 12