TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1105 of 1555
TM 9-2320-387-24-2 28-14. INTERMEDIATE CLUTCH ASSEMBLY AND FRONT BAND INSPECTION INITIAL SETUP: Manual References TM 9-2320-387-24P Equipment Condition Transmission disassembled into subassemblies (para. 28-3). Maintenance Level General support This task covers: Inspection NOTE • Intermediate clutch plates, backing plate, and front band were removed during disassembly. Inspect clutch plates only if they will be reused. • Work area should be well-ventilated, clean, and free from blowing dirt and dust. • Replace damaged plates as a set. • Wave plate is used on 1997-1998 transmissions only. 1. Inspect wave plate (5), four clutch plates (3), and clutch plate assemblies (4) for cracks, wear, and evidence of overheating and scoring. 2. Inspect backing plate (1) for cracks, breaks, scoring, and evidence of overheating. Replace if damaged. 3. Inspect front band (2) for cracks, loose or damaged anchor or pin ends, and worn or burned composition material. Replace if damaged. Inspection 28-56 Change 1 1 4 2 3 1 4 5 2 3 1995 - 1996 MODELS 1997 - 1998 MODELS