TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 1101 of 1555

TM 9-2320-387-24-2 28-13. TURBINE SHAFT AND OVERDRIVE CARRIER ASSEMBLY REPAIR (Cont’d) f. Overdrive Carrier Measurement 1. Set dial indicator to read pinion gear (1) end play. 2. Lift pinion gear (1) and read movement from dial indicator. Normal end freeplay is 0.009-0.024 in. (0.229-0.610 mm). If not, replace overdrive carrier assembly (61. g. Overdrive Carrier Cleaning Clean all components in accordance with para. 2-14. h. Overdrive Carrier Inspection 1. 2. 3. 4. 5. 6. Inspect pinion gears (1) surfaces for scoring or burrs. Remove minor burrs. Replace overdrive carrier assembly (6) if damaged. Inspect pinion gears (1) for damaged teeth and scored or damaged bearing bore. Replace overdrive carrier assembly (6) if damaged. Inspect roller clutch assembly (3) for cracked or broken rollers or cage and scoring. Replace roller clutch assembly (3) if damaged. Inspect bearing assembly (4) for damage. Replace if damaged. Inspect carrier (6) for cracks, breaks, or scoring on finished thrust surfaces. Remove minor scoring. Replace overdrive carrier assembly (6) if damaged. Inspect pinion pins (5) and pinion pin retainer (2) for looseness and drainage. Replace overdrive carrier assembly (6) if loose or damaged. 28-52