TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1073 of 1555
TM 9-2320-387-24-2 28-8. GEAR UNIT AND OUTPUT ASSEMBLIES REPAIR (Cont’d) 28-26.2 Change 1 NOTE Work area should be well-ventilated, clean, and free from blowing dirt and dust. 1. Remove sun gear shaft (4) from sun gear (5) and main shaft (6). 2. Remove reaction drum (2) from output carrier assembly (8). NOTE Keep all bearing and races together as sets. 3. Remove bearing and two races (3) and sun gear (5) from output carrier assembly (8). NOTE Place output carrier assembly on its side for ease of disassembly. 4. Remove thrust washer (7) from output carrier assembly (8). 5. Remove thrust washer (9), snapring (10), output shaft (11), and bearing and two races (12) from internal gear (13). 6. Remove internal gear (13), main shaft (6), and bearing and two races (14) from output carrier assembly (8). 7. Remove snapring (15) and internal gear (13) from main shaft (6). 8. Remove roller clutch (1) from reaction drum (2). a.1. Disassembly (1996-1998)