TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 1060 of 1555

TM 9-2320-387-24-2 28-3. TRANSMISSION DISASSEMBLY INTO SUBASSEMBLIES (Cont’d) 1. Turbine Shaft and Overdrive Carrier Assembly Removal I 1. Lift turbine shaft.(1) and remove overrun clutch housing assembly (10) from transmission case (7). CAUTION Correct torque for installed fourth clutch bolt should be 133 lb-in. (15 N-m). If not tightened to minimum torque, check case for cracks and damaged threads. Replace case if damaged. 2. Check fourth clutch bolt (12) torque for a minimum of 133 lb-in. (15 N=m). 3. Remove bolt (12) from fourth clutch housing (11) with torx adapter. Discard bolt (12). 4. Remove fourth clutch housing (11). 28-15