TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 105 of 1555
10-53. FIRE EXTINGUISHER BRACKET MAINTENANCE This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Fire extinguisher removed (TM 9-2320-387-10). Maintenance Level Unit TM 9-2320-387-24-2 10-88 Change 1 FOLLOW-ON TASK: Install fire extinguisher (TM 9-2320-387-10). 1. Remove four capscrews (6) and retainer plate (4) from two supports (3). 2. Remove four capscrews (1), washers (2), and fire extinguisher bracket (7) from retainer plate (4). NOTE For inspection and removal of struxnuts, refer to para. 10-56. Inspect four struxnuts (5). Replace if damaged. 1. Install fire extinguisher bracket (7) on retainer plate (4) with four washers (2) and capscrews (1). Tighten capscrews (1) to 6 lb-ft (8 N•m). 2. Install retainer plate (4) on two supports (3) with four capscrews (6). Tighten capscrews (6) to 68-82 lb-in. (8-9 N•m). c. Installation b. Inspection a. Removal 7 1 6 3 5 4 3 2