TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1046 of 1555
TM 9-2320-387-24-2 Change 1 28-1 28-2. TRANSMISSION DISASSEMBLY, REPAIR, AND ASSEMBLY TASK SUMMARY TASK PAGE PARA. PROCEDURES NO. 28-3. Transmission Disassembly into Subassemblies 28-2 28-4. Torque Converter Maintenance 28-20 28-5. Transmission Case Maintenance 28-22 28-6. Parking Lock Pawl and Actuator Assembly Inspection 28-24 28-7. Rear Band and Selective Thrust Washer Inspection 28-25 28-8. Gear Unit and Output Assemblies Repair 28-26 28-9. Center Support Repair 28-32 28-10. Direct Clutch Assembly Repair 28-38 28-11. Forward Clutch Assembly Repair 28-42 28-12. Fourth Clutch Assembly Repair 28-46 28-13. Turbine Shaft and Overdrive Carrier Assembly Repair 28-48 28-14. Intermediate Clutch Assembly and Front Band Inspection 28-56 28-15. Front Servo Repair 28-57 28-16. Rear Servo Repair (1995) 28-58 28-16.1. Rear Servo Repair (1996-1998) 28-58.2 28-17. Control Valve and Accumulator Housing Repair 28-60 28-18. Oil Pump Assembly Repair 28-66 28-19. Transmission Assembly from Subassemblies 28-72 CHAPTER 28 TRANSMISSION (GS) REPAIR This chapter contains maintenance instructions for disassembly and repair of transmission components at the general support maintenance level. Some subassemblies and parts must be removed before transmission system components can be accessed. They are referenced to other paragraphs in this manual. TRANSMISSION DISASSEMBLY, REPAIR, AND ASSEMBLY 28-1. INTRODUCTION