Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 1044 of 1555

TM 9-2320-387-24-2 27-3. BODY WIRING HARNESS REPLACEMENT (Cont'd) 27-38 Change 1 80. Connect harness leads 25A (10) and 26A (1) to horn (2). 80.1. Install conduit (6.1) and (6.2) on harness (4) if removed. 81. Install harness (4) on crossmember (7) with clamp (9) and screw (8). 82. Install harness (4) on left airlift bracket (3) with three clamps (6) and screws (5). 83. Connect harness leads 17E, 18C, and 91D (18) on headlight (20). 84. Install harness (15) on headlight housing (19) with three clamps (14), screws (13), and nuts (29). 85. Install harness connector (12) on plate (26) with four screws (25) and nuts (22). 86. Install plate (26) on headlight housing (19) with screw (16), clamp (17), nut (27), screw (21), and locknut (23). 87. Install plate (26) on bracket (28) with four screws (24). 88. Connect hood harness connector (11) to harness connector (12). 89. Repeat steps 84 through 88 for opposite side. 1 10 2 3 4 5 6 7 6.1 6.2 8 9