TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 104 of 1555
10-52. CARGO TIEDOWN REPLACEMENT This task covers: a. Removal b. Installation NOTE For removal of rear cargo tiedown, one assistant will be needed. 1. Remove hex-head screw (1) and front cargo tiedown (2) from cargo floor (3). 2. Remove locknut (7), washer (6), hex-head screw (4), and rear cargo tiedown (5) from cargo floor (3). Discard locknut (7). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Locknut (Appendix G, Item 121) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-24P Maintenance Level Unit NOTE For installation of rear cargo tiedown, one assistant will be needed. 1. Install front cargo tiedown (2) on cargo floor (3) with hex-head screw (1). Tighten hex-head screw (1) to 65 lb-ft (88 N•m). 2. Install rear cargo tiedown (5) on cargo floor (3) with hex-head screw (4), washer (6), and locknut (7). Tighten locknut (7) to 65 lb-ft (88 N•m). TM 9-2320-387-24-2 Change 1 10-87 a. Removal b. Installation 1 2 3 ~ 3 4 5 6 7 ~