TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1010 of 1555
TM 9-2320-387-24-2 I 27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d) I 12. Disconnect harness connector (1) from brake warning lamp switch (2). 13. Remove three locknuts (41, capscrews (6), clamps (51, and harness (9) from cowl (3). Discard locknuts (4). 14. Remove locknut (81, clamp (71, and harness (9) from cowl (3). Discard locknut (8). NOTE Top screws connecting closeout plate may be longer than other screws if the fuel filter drain tube is routed to top of closeout plate. 15. Remove four locknuts (121, screws (131, closeout plate (10). and grommet (11) from cowl (3). Discard locknuts (12). 16. Remove closeout plate (10) and grommet (11) from harness (9). 27-4