TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 101 of 1555
TM 9-2320-387-24-2 I 1O-50. CARGO BULKHEAD EXTENSION MAINTENANCE This taskcovers: a. Removal b. Disassembly INITIAL SETUP: c. Assembly d. Installation ApplicableModels Ml113 Materials/Parts Eight locknuts (Appendix G, Item 127) Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P Maintenance Level Unit Remove quick-release pin (12) from post assembly (4) and remove cargo barrier extension (5) from cargo bulkhead (13). 71 1. Remove screw (6) and lanyard (7) from post assembly (4). 2. Remove twenty-four screws (11, nut and washer assemblies (31, and three backboards (2) from four post assemblies (4). 3. Remove eight locknuts (ll), washers (91, capscrews (81, washers (91, and four mounting brackets (10) from cargo bulkhead (13). Discard locknuts (11). rXz&l 1. Install lanyard (7) on post assembly (4) with screw (6). 2. Install three backboards (2) on post four assemblies (4) with twenty-four screws (1) and nut and washer assemblies (3). 3. Install four mounting brackets (10) on cargo bulkhead (13) with eight washers (91, capscrews (8i, washers (91, and locknuts (11). d. Installation NOTE When installing cargo barrier extension, ensure side rack pin’s on post assemblies slide into holes of cargo bulkhead. Install cargo barrier extension (5) on cargo bulkhead (13) with quick-release pin (12). 1 O-84