TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 1005 of 1555

TM9-2320-387-24-2 26-3. 9,000 LB WINCH REPAIR (Cont’d) 23. 24. 25. 26. Install plate (211, anchor (221, and three tie rods (241 on drum supports (2) and (19) with six capscrews (20). Tighten capscrews (20) to 18 lb-R (24 N-m). Install two springs (23) on anchors (22) and plate (21). NOTE If motor or control have been precoated with sealing compound, remove compound from between motor case and control mounting gear contact area. Failure to do so may cause improper grounding of control. Install clamp (27) on motor (13). Install control pack (26) on motor (13) and tighten clamp (27). 26-9