TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 1001 of 1555
TM9-2320-387-24-2 26-3. 9,000 LB WINCH REPAIR (Cont’d) 20. Remove detent spacer (291, spring (281, and detent ball (27) from gear housing (23). 21. Remove nut (26) and clutch lever (25) from gear housing (23). 22. Remove retaining ring (31) from gear housing (23). NOTE Intermediate ring gear will come out with 85-87 steel balls. Be careful to catch all 85-87 steel balls. 23. Remove intermediate ring gear (32) and 85-87 steel balls (30) from gear housing (23). 24. Remove input sun gear (341, input gear carrier (331, and thrust plate (35) from gear housing (23). 25. Remove intermediate gear carrier (361, output gear carrier (371, and output ring gear (21) from gear end drum support (7). 26. Remove gasket (38) and drum bushing (39) from gear end drum support (7). Discard gasket (38). b 23 1 b. Cleaning 1 CAUTION Do not clean brake assembly or damage to equipment may result. Clean all winch components in accordance with para. 2-14. 26-5