TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 100 of 1555
TM 9-2320-387-24-2 1 O-49. CARGO BULKHEAD REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Materials/Parts Ml113 Four lockwashers (Appendix G, Item 220) Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P Maintenance Level Unit I. Remove two capscrews (71, lockwashers (81, washers (91, and cargo bulkhead bracket (10) from cargo floor (11). Discard lockwashers (8). 2. Remove two nuts (11, lockwashers (2), washers (31, capscrews (51, and washers (3) from cargo bulkhead (6) and B-pillar (4). Discard lockwashers (2). 3. Remove cargo bulkhead (6) from vehicle. 4. Inspect antinoise pads (121. Replace if damaged. -1 1. Install cargo bulkhead (6) on cargo floor (11). 2. Install cargo bulkhead (6) on B-pillar (4) with two washers (3), capscrews (5), washers (31, lockwashers (2), and nuts (1). 3. Install cargo bulkhead bracket (10) on cargo floor (111with two washers (91, lockwashers (8), and capscrews (7). Tighten capscrews (7) to 65 lb-R (88 Nom). 4. Tighten nuts (1) to 15 lb-R (20 Nom). 1 O-83