TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 981 of 1205
TM?-2320-387-24-1 6-28. SHOCK ABSORBER REPLACEMENT (Cont’d) NOTE Perform steps 5 through 8 if necessary to reassemble body mount bracket to frame and rear bumper. 5. Install shackle (4) and body mount bracket (3) on rear bumper (6) with washer (7) and slotted nut (8). 6. Tighten slotted nut (8) and install cotter pin (9). 7. Secure body mount bracket (3) to rear bumper (6) with two washers (Z), capscrews (5), washers (2), and locknuts (1). 8. Tighten locknuts (1) to 90 lb-ft (122 N-m). FOLLOW-ON TASKS: l Lower and secure hood (front shock absorbers only) (TM 9-2320-387-10). l Install shelter (Ml113 only) (rear shock absorbers only) (para. 11-78). 6-66