TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 963 of 1205
TM 9-2320-387-24-l 6-21. STABILIZER BAR LINK REPLACEMENT 1 This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P hlaterials/Parts Maintenance Level Unit Locknut (Appendix G, Item 117) Sealing compound (Appendix C, Item 63) I a. Removal 1 1. Remove locknut (1) and two washers (2) from bar link (3) and stabilizer bar (4). Discard locknut (1). 2. Remove capscrew (51, two washers (61, and bar link (3) from lower control arm (7). b. Installation 1. Apply sealing compound to threads of capscrew (5). InstaIl bar Iink (3) on lower control arm (7) with two washers (6) and capscrew (5). Tighten capscrew (5) to 70 lb-R (95 Nom). 2. Install bar link (3) on stabilizer bar (4) with two washers (2) and locknut (1). Tighten locknut (1) to 75 Ib-ft (102 Nom). 6-50