TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 951 of 1205
I TM 9-2320-387-?4-1 1 6-13. WHEEL STUD REPLACEMENT I This task covers: a. Removal b. Installation INITIALSETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Hex-nut (Appendix G, Item 106) Manual References TM 9-2320-387-24P Equipment Condition Wheel removed (para. 8-3). General Safety Instructions Always wear eye protection when replacing wheel studs. Maintenance Level Unit WARNING Always wear eye protection when replacing wheel studs. Severe eye injury may result if metal chips contact eyes. 1 a. Removal 1 1. Rotate spindle (3) to allow clearance for removal of stud (4) from spindle (3). 2. Drive stud (4) from spindle (3). Discard stud (4). b. Installation 1. Align sphnes on stud (4) with splines in spindle (3) and install stud (4) in spindle (3). 2. Install three washers (2) and hex-nut (1) on stud (4). 3. Tighten hex-nut (1) until head of stud (4) seats against spindle (3). 4. Remove hex-nut (1) and washers (2). Discard hex-nut (1). FOLLOW-ON TASK: Install wheel (para. 8-3). 6-38