Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 947 of 1205

6-11. GEARED HUB SPINDLE SEAL REPLACEMENT (Cont’d) CAUTION When installing steering arm cover, ensure seal in cover is aligned on spindle extension. Damage to seal will result. NOTE Immediately install steering arm cover after application of sealing compound. 10. Clean sealing surfaces on geared hub (1) and steering arm cover (2). Apply anaerobic sealing com- pound to steering arm cover (2) and install steering arm cover (2) on geared hub (1). 11. Apply sealing compound to threads of capscrews (4) and install steering arm cover (2) on geared hub (1) with four washers (3) and capscrews (4). Tighten capscrews (4) to 65 lb-ft (88 N•m). 12. Remove fill plug (5) and washer (6) from geared hub (1). 13. Fill geared hub (1) to proper oil level (para. 2-12). 14. Install washer (6) and fill plug (5) on geared hub (1). Tighten fill plug (5) to 8-13 lb-ft (11-18 N•m). FOLLOW-ON TASK: Install wheel (para. 8-3). TM 9-2320-387-24-1 6-34 Change 1 1 2 3 4 1 5 6