TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 943 of 1205
NOTE Have drainage container ready to catch oil. 1. Remove drainplug (2) from geared hub (1) and drain geared hub (1). Install drainplug (2) in geared hub (1) and tighten to 8-13 lb-ft (11-18 N•m). CAUTION Do not use sharp objects to aid in removing steering arm cover. NOTE It may be necessary to lightly tap steering arm cover with mallet to loosen from geared hub. 2. Remove four capscrews (5), washers (4), and steering arm cover (3) from geared hub (1). 6-11. GEARED HUB SPINDLE SEAL REPLACEMENT This task covers: a. Removal b. Installation Manual References TM 9-2320-387-24P Equipment Condition Wheel removed (para. 8-3). General Safety Instructions Ensure locktab on lockwasher is bent completely into slot on retaining nut. Maintenance Level Unit INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Special Tools Spindle seal installer (Appendix B, Item 109) Driver handle (Appendix B, Item 60) Wrench (Appendix B, Item 108) Materials/Parts Lockwasher (Appendix G, Item 218) Seal (Appendix G, Item 424) Grease (Appendix C, Item 34) Sealing compound (Appendix C, Item 58) Lubricating oil (Appendix C, Item 42) Sealing compound (Appendix C, Item 62) TM 9-2320-387-24-1 6-30 Change 1 a. Removal 1 2 1 3 4 5