TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 936 of 1205
TM9-2320-387-24-l 6-9. GEARED HUB REPLACEMENT (Cont’d) 8. 9. 10. 11. WARNING Geared hub must be supported during removal. Failure to support geared hub may cause injury to personnel or damage to equipment. NOTE Note direction of inner and outer capscrews for installation. Remove four locknuts (181,washers (141,capscrews (151, and washers (14) from lower ball joint (16) and lower control arm (17). Discard locknuts (18). Remove four locknuts (31, washers (21, capscrews (11, and washers (2) from upper ball joint (4) and upper control arm (5). Discard locknuts (3). Remove cotter pin (23), slotted nut (241, and upper ball joint (4) from upper control geared hub (12). Discard cotter pin (23). Lower support and remove geared hub (12). ( arm (5) and 6-23